When we were conducting experiments, we found that the glue would contain bubbles, which would affect the experimental values.

Using a defoaming machine is an effective method to remove bubbles from glue. The defoaming machine can completely remove bubbles in the adhesive through the action of centrifugal force and shear force, improving the quality and stability of the adhesive.

The following are the steps to remove bubbles from glue using a defoaming machine:

1. Prepare the defoaming machine: Ensure that the defoaming machine is clean and adjust the parameters appropriately, such as speed and running time.

2. Put the glue into the defoaming machine: Pour the glue that needs to remove bubbles into the container of the defoaming machine. Be careful not to exceed the capacity limit of the defoaming machine.

3. Start the defoaming machine: According to the operating instructions of the defoaming machine, start the machine and start the defoaming process. Usually, the defoaming machine generates centrifugal and shear forces through rotation and stirring to extract bubbles from the glue.

4. Control the defoaming parameters: Adjust the speed and operating time of the defoaming machine according to the specific situation to achieve the best defoaming effect. Different adhesives may require different parameter settings and need to be adjusted according to actual situations.

5. Removing bubbles: During the operation of the defoaming machine, bubbles will gradually be eliminated by centrifugal and shear forces. Continuous operation can effectively remove bubbles from the glue.

6. Inspection result: After the operation of the defoaming machine is completed, stop the machine and check the glue. Normally, bubbles in glue should be significantly reduced or completely eliminated.

The use of a defoaming machine can quickly and efficiently remove bubbles from glue, improving the quality and reliability of the glue. This method is suitable for various types of glue, including industrial glue, tape glue, manual glue, etc.