News
TEL:18925129293
Two-part epoxy AB potting compound: Mixing and degassing to eliminate voids during curing.
date:2026-11-18author:小施Power modules, sensors and circuit boards are widely protected and encapsulated with two-component epoxy AB potting compounds. The resin (Part A) and curing agent (Part B) of AB glue require precise proportioning and mixing. Manual mixing is inefficient and tends to cause uneven blending, resulting in incomplete local curing after solidification. In addition, air is continuously entrapped during stirring, and bubbles trapped inside the compound form cavities and pores after curing. Such cavities reduce dielectric strength and lead to failure in voltage withstand tests. Moisture can easily penetrate the circuit board through pores, causing corrosion and short circuits of components — a common quality issue in the power supply industry.
SIENOX planetary mixing and defoaming machine supports proportional feeding and completes AB glue mixing and simultaneous vacuum defoaming inside a sealed chamber. The combined revolution and rotation motion enables thorough integration of resin and curing agent without dead mixing zones. The whole process can be started with one click and runs automatically after setting the rotating speed, vacuum duration and segmented processes. It replaces manual mixing and avoids deviations in proportioning and stirring time caused by human operation. No long static defoaming is required after mixing, greatly shortening the production waiting cycle. The mixing cup is independent and replaceable to prevent cross-contamination between different adhesives. The potting compound after mixing and defoaming features uniform components and fully removed bubbles. The cured compound is dense without cavities, delivering stable insulation performance to pass voltage withstand and moisture resistance tests.
Benchtop models are suitable for R&D and sampling, while large-capacity models are available for pilot and small-batch potting production. Sample testing service is provided for power manufacturers to verify the mixing effect of adhesives in advance and evaluate the appearance and electrical performance after curing. The stable mixing and defoaming process helps enterprises reduce potting defects and improve the protection reliability of power supplies, sensors and other electronic devices.
