Products

SIENOX UV coating defoaming solution is designed for high-gloss, high-transparency UV curable coatings. Bubbles existing before curing will develop into pinholes and fish eyes. The solution uses low-shear vacuum defoaming, which generates little heat to prevent premature curing and yields bright, defect-free UV coatings.

SIENOX high-temperature coating defoaming solution is tailored for silicone heat-resistant paints, as well as boiler and exhaust pipe coatings formulated with aluminum powder, glass powder and other heat-resistant fillers. Featuring integrated vacuum stirring, defoaming and dispersion, it delivers dense, pinhole-free heat-resistant coatings that resist foaming and cracking under high-temperature working conditions

SIENOX water-based coating defoaming solution targets the foaming defect commonly found in water-based industrial paints, water-based wood coatings and architectural coatings caused by built-in surfactants. Adopting pure physical vacuum defoaming without any defoamer addition, it effectively avoids weakened paint film adhesion, delivering fuller coating surfaces and significantly fewer pinhole

SIENOX phenolic resin defoaming solution is suitable for powder-resin systems such as bakelite powder, phenolic molding compounds, grinding wheel and brake pad binders, and refractory castables. Mixing and degassing are carried out at the same time under negative pressure to obtain homogeneous mixtures and dense green bodies, lowering pores, porosity and mechanical defects after curing or sintering.

SIENOX phenolic resin defoaming solution is applied to powder-resin systems including bakelite powder, phenolic molding compounds, grinding wheel and brake pad binders, refractory castables. Mixing and degassing are carried out simultaneously under negative pressure to realize uniform mixing and dense green bodies, and cut down pores, porosity and mechanical defects after sintering or curing.

SIENOX flexographic ink defoaming solution addresses the tendency of water-based flexographic ink with surfactants to generate foam. It adopts physical vacuum defoaming without adding defoamers to avoid impairing ink film adhesion and printability, ensuring uniform ink transfer on anilox rollers and distinct halftone dots.