Why You Need to Remove Bubbles

Structural defects — Bubbles create voids, weakening adhesion and leading to delamination.

Surface flaws — Air pockets cause pinholes, craters, and poor aesthetics on finished products.

Performance loss — Optical clarity, electrical conductivity, and insulation properties degrade significantly.

Process instability — Inconsistent dispensing, component defects, and higher scrap rates.

Removing bubbles is critical to achieving defect‑free, high‑quality production.

Why SIE‑C008

0–4500 RPM adjustable speed Industry‑leading centrifugal force for thorough and rapid bubble extraction.

Vacuum up to -99 kPa Removes even micron‑sized bubbles for void‑free materials.

Non‑contact planetary design Unique patented (游星式) technology; zero foreign contact ensures material chemical properties remain unchanged.

Low noise ≈ 50 dB Silent model suitable for labs, offices, and industrial environments.

8‑syringe capacity Higher throughput than the base C006 model for pilot and production needs.

Wide container compatibility Supports various syringes, tubes, cans, and proprietary containers.

100‑program digital memory Repeatable, operator‑independent results for quality control.

Optional MES / cooling / heating Full in‑line integration with real‑time process traceability.

Working principle

Principle of centrifugal defoamer: By using the principle of gravity downward to release bubbles, it can efficiently remove tiny bubbles from materials and improve product quality.

Product parameters table

***The above are just typical models, and we can provide personalized solutions according to customer needs.

Applications

Sienox centrifugal defoaming technology is applicable across a wide range of industries and materials:

Semiconductor & Microelectronics — Void‑free underfill, encapsulation, conductive pastes. Sienox technology achieves void rates below 0.001% in advanced semiconductor packaging.

New Energy — Battery electrode slurries and structural adhesives with <0.2% porosity.

LED / LCD / Optical — Bubble‑free phosphor coatings and optical‑grade silicone encapsulation.

Medical & Pharma — Contamination‑free processing of medical‑grade silicones and composites.

Adhesives & Chemicals — Epoxies, PU, silver pastes, high‑viscosity structural glues.

Cosmetics & Daily Chemicals — Creams and gels with uniform, air‑free texture.

R&D Labs & Universities — Small‑batch preparation and material testing.

*Sienox has processed 1,800+ material cases. Contact us with your specific material for a free sample test.*

Customer Proof

EV Battery Pack Sealing

Using Sienox equipment, a structural silicone adhesive manufacturer achieved <0.2% porosity, stable viscosity control at 60 °C, and IP67 waterproof compliance — enabling 500,000 battery packs/year with zero leakage.

5G mmWave Semiconductor Packaging

Sienox planetary defoaming technology helped achieve 99.2% nano‑silica filler uniformity, 30% fluidity improvement, reduced filling time to 3 seconds, and void rate below 0.001% in advanced 5G chip packaging.

Laboratory Materials Research

A researcher reports: “I have been using Sienox equipment for three years. It thoroughly removes bubbles in a relatively short time, making the material surface smoother and more uniform. It provides me with an efficient and reliable solution for bubble removal, allowing me to make greater progress in materials research.”

Our cooperative clients

***Only partial successful customer information is displayed. We need more case studies and product selection materials. Please feel free to contact us

FAQ

1. What materials can the C008 process?

Fluorescent powders, adhesives, silicone gels, silver/aluminum pastes, conductive inks, battery slurries, epoxy resins, and cosmetic formulations. Free sample testing available.

2. Does the process change material properties?

No. The non‑contact patented planetary design ensures original chemical composition remains intact — no blades, no paddles, no contamination.

3. What containers are supported?

Standard syringes (3–55 cc), tubes, cans, and fully custom proprietary containers.

4. Can it integrate into a production line?

Yes — optional MES connectivity, heating, cooling, and vacuum modules support full in‑line operation.

5. How does the C008 differ from C006 and C012?

C006 (6 syringes, 0–30 cc) is ideal for desktop lab research; C008 (8 syringes, 0–55 cc) suits pilot testing and batch preparation; C012 (16 syringes, 0–200 cc) handles higher‑volume production. All share the same core non‑contact planetary technology.

6. How do I start a sample evaluation?

Send your materials to Sienox — we provide free testing and a detailed process recommendation report.

Sienox Defoaming Machine Product Selection Table

***The above are just typical models, and we can provide personalized solutions according to customer needs.

◆ Syringe quantity optional 

◆ Tube/can options available, with a wide variety of container types 

◆ Vacuum level up to -99kPa 

◆ Capable of storing up to 100 sets of operating parameters 

◆ Non-contact design that does not alter the chemical properties of the material 

◆ Unique patented design with strong centrifugal force for clean and efficient defoaming 

◆Speed range: 0-4500 RPM, adjustable for different material characteristics 

◆ Silent model, suitable for offices, laboratories, and industrial use 

◆ Customizable capacity, with standard options of 30cc, 55cc, 75cc, 960mL, and 2600mL 

◆ Equipped with imported components, the casing is made of 304 stainless steel for long-lasting durability 

◆ Optional features: vacuum, temperature control, and MES system connectivity 

◆ Aesthetically pleasing, sturdy, and durable design

This centrifugal defoaming machine meets the defoaming needs for 0-55cc, featuring a unique patented design that provides strong centrifugal force, ensuring clean and efficient defoaming. We offer personalized customization services based on customer requirements. It is versatile in application, aesthetically pleasing, sturdy, and durable.